Filament Nebula ABS 702 Black 1.75mm 2.5kg Large Spool

Filament Nebula ABS 702 Black Black 1.75mm 2.5kg Large Spool

Filament Nebula ABS 702 1.75 mm | Black (Black) | Large Spool 2.5 kg

Choose uncompromising mechanical strength, thermal resistance and maximum serial printing efficiency. Nebula ABS 702 filament in a classic, deep black color (Black) on a large 2.5 kg spool is an advanced construction material made of acrylonitrile-butadiene-styrene, created for professional engineering workshops, large-scale printing and mass production.

The improved Nebula ABS 702 formula is distinguished by reduced processing shrinkage and excellent interlayer adhesion, which ensures lasting structural coherence and dimensional stability of the created models. Ready-made prints are perfect for mechanical processing (grinding, drilling, threading) and chemical smoothing with acetone vapor. The large 2.5 kg roll eliminates the need for frequent material replacement during long work cycles.

Main advantages of the Nebula ABS 702 filament:

• Efficient 2.5 kg spool: Perfect for long prints, large-size models and mass production without interruptions for set-up.
• Thermal and mechanical resistance: Details retain stiffness and geometry at elevated temperatures and under dynamic loads.
• Wide post-processing possibilities: Trouble-free mechanical processing (grinding, drilling, painting) and chemical smoothing with acetone vapor to a high gloss.
• Low material shrinkage: Modern composition minimizes internal stresses and prevents deformation of models on the work table.
• Reinforced layer adhesion: Strong bonds between tracks eliminate the risk of delamination of details.

Technical specifications:

Producer: Nebula Filaments Series: ABS 702 Material: ABS (acrylonitrile butadiene styrene) Color: Black Filament diameter: 1.75mm Material net weight: 2.5kg (2,500g) Print area: Glossy (glossy) Condition: Brand new, hermetically packed on a spool with a moisture absorber

Suggested 3D printing parameters:

• Head (nozzle) temperature: 230°C – 260°C
• Working table temperature: 90°C – 100°C
• Printing speed: 30 – 150 mm/s
• Print airflow: Not recommended (0% or disabled)
• Working chamber: Recommended closed working chamber (recommended especially for large models)
• Adhesives: Not required, for optimal adhesion you can use: Dimafix, StickIT
• Drying of the material: Optional (for optimal properties: 60°C for approx. 4 hours)

x