Filament Nebula ABS 702 Aquamarine Blue 1.75mm 2.5kg Large Spool

Filament Nebula ABS 702 Aquamarine Blue 1.75mm 2.5kg Large Spool

Filament Nebula ABS 702 1.75 mm | Aquamarine Blue | Large Spool 2.5 kg

Choose uncompromising mechanical strength, thermal resistance and maximum serial printing efficiency. Nebula ABS 702 filament in a distinct shade of sea (Aquamarine Blue) on a large 2.5 kg spool is an advanced construction material based on acrylonitrile-butadiene-styrene, created for professional workshops, large-scale printing and mass production.

The improved recipe of Nebula's ABS 702 is characterized by reduced processing shrinkage and excellent interlayer adhesion, guaranteeing structural coherence and dimensional stability of details. Printed elements are perfect for mechanical processing (grinding, milling, threading) and chemical smoothing with acetone vapor. The large 2.5 kg roll eliminates the need to frequently change the spool during long production cycles.

Main advantages of the Nebula ABS 702 filament:

• Efficient 2.5 kg spool: Perfect for long prints, large-size models and mass production without breaks for material replacement.
• Thermal and mechanical resistance: Details retain full stiffness and stability at elevated temperatures and under dynamic loads.
• Wide post-processing possibilities: Trouble-free mechanical processing (grinding, drilling, sawing) and chemical smoothing with acetone vapor to a high gloss.
• Reduced linear shrinkage: The refined composition minimizes internal stresses and prevents deformation of models on the work table.
• Optimized layer adhesion: Strong bonds between tracks eliminate the risk of delamination.

Technical specifications:

Producer: Nebula Filaments Series: ABS 702 Material: ABS (acrylonitrile butadiene styrene) Color: Aquamarine Blue (Aquamarine / Marine) Filament diameter: 1.75mm Material net weight: 2.5kg (2,500g) Print area: Glossy (glossy) Condition: Brand new, hermetically packed on a spool with a moisture absorber

Suggested 3D printing parameters:

• Head (nozzle) temperature: 230°C – 260°C
• Working table temperature: 90°C – 100°C
• Printing speed: 30 – 150 mm/s
• Air per print: Not recommended (0% or disabled)
• Working chamber: Recommended closed working chamber (recommended especially for a 2.5 kg spool and large dimensions)
• Adhesives: Not required, for optimal adhesion you can use: Dimafix, StickIT
• Drying of the material: Not required (for best properties: 60°C for approx. 4 hours)

x