Filament Nebula ASA KEVLAR Black Włókno 1.75mm 0.8kg

Filament Nebula ASA KEVLAR Black Black Fiber 1.75mm 0.8kg

Filament Nebula ASA KEVLAR 1.75 mm | Black (Matte Black) | 0.8 kg (800 g)

Discover an engineered durability class built to perform in extreme environmental conditions. Nebula ASA KEVLAR filament in a deep, technical shade of black (Black) on a 0.8 kg spool is an advanced composite of acrylonitrile-styrene-acrylate matrix reinforced with chopped aramid fibers (Kevlar). The material combines resistance to solar degradation with outstanding impact strength and abrasion resistance.

The addition of aramid fibers drastically reduces the processing shrinkage of the material, facilitating the printing of details with high dimensional stability without the need to use a heated, tightly closed chamber. The finished elements are characterized by an elegant, deeply matte surface that effectively masks the lines of subsequent layers. Due to the abrasive properties of aramid fibers, it is recommended to use a hardened nozzle (made of hardened steel, ruby ​​steel or tungsten carbide) for printing.

The main advantages of the Nebula ASA KEVLAR filament:

• Aramid fiber reinforcement: Provides exceptional resistance to impact, material fatigue, cracking and direct abrasion.
• Full resistance to UV and atmospheric factors: The ASA matrix guarantees unchanged mechanical parameters and color under the influence of sun, rain or frost.
• Low material shrinkage: Kevlar fibers stabilize the geometry of the detail during cooling, minimizing shrinkage stresses and warping.
• Elegant, matte finish: The matte texture with a technical structure perfectly hides the print layers, giving the models a professional look.
• High thermal and chemical resistance: Designed for mechanical loads at elevated temperatures and in contact with oils or greases.

Technical specifications:

Producer: Nebula Filaments Series: ASA KEVLAR Base material: ASA (acrylonitrile-styrene-acrylate) + aramid fibers (Kevlar) Color: Black Filament diameter: 1.75mm Material net weight: 0.8 kg (800 g) Print area: Matte (matt) Nozzle Type: Recommended hardened nozzle (hardened steel / tungsten carbide) Condition: Brand new, hermetically packed on a spool with a moisture absorber

Suggested 3D printing parameters:

• Head (nozzle) temperature: 240°C – 280°C
• Working table temperature: 90°C – 100°C
• Printing speed: 25 – 70 mm/s
• Print airflow: 0 – 15% (recommended low or off)
• Working chamber: Not required (open or closed space)
• Adhesives: Not required, for better adhesion you can use: Dimafix, StickIT, 3DLac
• Drying conditions: Not required (for optimal results: 60°C for approx. 4 hours)

x